Wilcox Associates, Inc. is proud to bring you PC-DMIS 2009. This Enterprise Metrology Solutions platform brings together new aspects of PC-DMIS for the development of a complete manufacturing process control solution.
Available in this release are variations of PC-DMIS designed to assist with every aspect of the fabrication and quality control process. The newly created packages include PC-DMIS Laser, PC-DMIS Vision, PC-DMIS NC, as well as the established PC-DMIS Pro, PC-DMIS CAD, and PC-DMIS CAD++ platforms.
Also included with this release is PC-DMIS ONE, a simplified shop-floor DCC inspection package developed in cooperation with Brown & Sharpe.
Additionally, this release provides you with the optional module of PC-DMIS Inspection Planner, an evolutionary step that provides a paper-less, completely electronic inspection process.
Windows XP 32-bit, Windows XP 64-bit (x64), Windows Vista 32-bit Operating System. Note that PC-DMIS 2009 will NOT function on computers using any other operating system.
Pentium IV or higher processor is suggested.
2 GHz XEON or Intel processor.
2 GB of RAM (but significantly more may be required if working with large CAD models).
1 GB of free hard drive space minimum for the application.
SVGA graphics card capable of OpenGL shading. (We cannot specify the exact Graphics card because every user has varying needs). Note that Nvidia GeForce video cards are not recommended. These are defined as "gaming" cards according to Nvidia Engineering.
SVGA capable monitor.
Screen resolution of 1280 x 1024 or higher.
RTF file output requires Microsoft Word to be viewed.
Microsoft® .NET 2.0.
DVD-ROM drive.
USB Port.
Recommended Minimums:
Windows XP 32-bit, Windows XP 64-bit (x64), Windows Vista 32-bit Operating System. Note that PC-DMIS 2009 will NOT function on computers using any other operating system.
2 GHz or higher Duo-Core processor for improved performance.
4 GB of RAM or higher. More RAM may be required if working with large CAD models. You should have RAM equal to 8 times the size of your largest CAD file. (For example, if you use an IGES model of 250 MB, then 2 GB RAM is recommended)
2 GB of free hard drive space plus enough for allocated Virtual Memory equal to 8 times the largest CAD file used.
SVGA graphics card that supports OpenGL shading and that has WHQL (Microsoft Windows Hardware Quality Labs) certified drivers. (WHQL drivers can be downloaded automatically when using the Windows Update software.) On board video card memory should be based on the size of your largest CAD file.
For use without CAD models, 64 MB video memory.
For small to medium CAD files (50-100 MB), 128 MB video memory.
For large CAD files (>100 MB), 256+ MB video memory.
RTF file output requires Microsoft Word to be viewed.
Microsoft® .NET 2.0.
SVGA capable monitor.
Screen resolution of 1280 x 1024 or higher.
DVD-ROM drive.
2 USB Ports.
Depending on your specific needs, the recommended system specifications for this version of PC-DMIS may be much higher. A more substantial computer system may be required to accommodate part programs using Automation or complex Reporting objects. Be sure to consult with your PC-DMIS distributor to find out the type of computer system you will need in order to run this software at its optimum capability.
When using 3rd-party drivers you should contact your local Hexagon representative to ensure Operating Sytem compatibility.
PC-DMIS 2009 also continues to support Enterprise Metrology Solutions that expand upon the already full-featured functionality of PC-DMIS Pro, CAD, and CAD++. Listed below are additional packages available since PC-DMIS 3.7.
Established since version 3.5, this variation of PC-DMIS provides a simplified user interface designed for basic inspection but contains many available options for somewhat complex measuring needs.
Established since version 3.5, this variation of PC-DMIS is designed for working with imported CAD models to increase the ease of creating inspection programs as well as analyzing complex geometries.
Established since version 3.5, this variation is the most comprehensive version of PC-DMIS, containing the functionality of PC-DMIS CAD and Pro, along with Gear and Blade measuring package options.
PC-DMIS can be used in combination with supported laser probes to measure features on a part or to collect data. Laser probes allow you to easily and rapidly collect millions of points of data (called clouds of points). These clouds of points are then used within PC-DMIS for surface contour maps, export to reverse engineering packages, and creation of constructed features.
A true measuring package available for use on a computer controlled machining center for initial layout and setup inspections, first piece inspection, and even final inspection of machined parts.
A cornerstone of the Enterprise Metrology Solutions suite, the PC-DMIS Inspection planner is an evolutionary step towards bottom line time savings for inspection.
PC-DMIS Inspection planner is integrated directly within the CAD system to allow the CAD engineer to create a definition of features to inspect, datums to use, and the proper GD&T to apply. This electronic inspection plan can then be used throughout the entire inspection process making it a truly paperless task.
Highlight Feature from Edit Window in Graphics Window
New Layer Management Dialog
SpacePilot Support
Area to Datum Target
UI Control for Animation Speed
Clearplane and Machine Volume Visualization
Protected Mode
These and other prominent enhancements, categorized by functionality, are discussed below.
Graphics and Graphics Display Window
Improved CAD Assembly - An updated CAD Assembly dialog box now lets you work with levels (layers) directly in the dialog box as well as save and recall assembly tree states.
Area to Datum Target - PC-DMIS now supports the display of area for datum targets in the CAD database.
User Interface Control for Animation Speed - A new slider control, added to the General tab of the SetUp Options dialog box, lets you dynamically set the animation speed.
Clearplane Visualization - A new icon on the Graphics Items toolbar shows clear planes as semi-transparent images in the Graphics Display window.
Machine Volume Visualization - When viewing virtual machines in the Graphics Display window, a new check box shows the machine volume as a transparent yellow cube.
Screen Counters - A new icon on the Graphics Modes toolbar displays the mouse pointer's part coordinates in small red text directly in the Graphics Display window.
Create Probe Tip Angles Dynamically - A new Select Tip toolbar, lets you modify tip angles dynamically within the Graphics Display window and update the TIP/ command in the part program automatically.
Graphic View Based on Probe Orientation - A new icon on the Graphics View toolbar rotates and pans the part's CAD model as needed to center the view, using the current probe's AB tip angle orientation.
Center in Graphics Display - This right-click shortcut menu item for a feature in the Edit window pans and rotates the part's CAD model as needed to center the current feature in the Graphics Display window.
Trihedron Color Modification - You can modify the line and pointers for each axis on the trihedron in the Graphics Display window.
Mouse Wheel Zoom Centers Part on Pointer - If you zoom in and out on your part using the track wheel PC-DMIS performs some dynamic centering of the part so that it centers on your pointer location.
Better CTRL + Right-Click Rotation Support - When in Program mode and the animated probe is displayed, holding down CTRL + right-click dragging with your mouse will now rotate the part.
CAD and Graphic Setup - Many color and display options (Screen Color, OpenGL Options, Display Symbols, and Trihedron Colors) are now consolidated onto a single tabbed dialog box.
Draw Less Than 10% on Rotate - The Modify Rotate Options dialog box allows less then 10% of remaining points to draw when rotating.
Rotation Options Stored with Part Program - Changes made to the Modify Rotate Options dialog box are applied to the current part program.
Modify CAD's Tolerances - A new CAD Tolerances dialog box lets you modify a CAD's resolution and precision tolerances.
Change Anti-aliasing for Speed or Quality - You can turn on or off anti-aliasing for wireframe or surface objects thereby optimizing for speed or quality in your CAD display.
Ability to Work with CAD GD&T Callouts - Some CAD models have GD&T callouts embedded inside the CAD. This enhancement lets you show, hide, move, or filter those callouts.
Import JT CAD - You can now import JT CAD models.
Verify CAD Information - The new CAD Verify dialog box lets you verify hat the model is accurate.
Path and Path Lines
Select Feature from Edit Window or Graphics Window - For path optimization, this lets you choose the starting or ending feature by either clicking on the feature in the Graphics Display window, Edit window, or feature combo box in the Path Optimization dialog box.
Limit Path Line Display - You can choose a range of feature commands in your part program and create path lines for only those selected features instead of the entire part program.
Editing
Protected Mode - A new menu item protects your part program from unauthorized edits.
Quick Editing of Auto Features from CAD window - You can now open up the Auto Feature dialog box for an auto feature by right-clicking on the ID label in the Graphics Display window and selecting Edit.
Use ID Prefix for Patterns - When working with patterns, a new Use Default Prefix check box in the Pattern Offsets dialog lets you determine whether or not PC-DMIS will use a default prefix when pasting a pattern.
User Interface
User Interface Improvements - Nearly all dialog boxes have been brought up to standards with improved positions for controls and so on.
Scanning
Section Cut Scan - This lets you define a cut plane that intersects with the CAD model, along the intersection line you can create a scan.
Hardware Support and Hardware Settings
SpacePilot Support - PC-DMIS now supports the SpacePilot® motion controller from 3DConnexion.
Average Tip Angle Errors - A new Use tip size averaging check box in the Probe Setup dialog box can, in some cases, improve overall accuracy by averaging errors between all AB tip angles that use a single physical tip.
Separate Slot Clearance Distances - You can now define separate slot clearance distances before dropping off and before picking up the probe. This helps avoid collision with the rack.
Dimensioning
True Position In-Between Dimension - This dimension type computes an in-between true position deviation and deviation angle from two specified True Position dimensions.
Y14.5 Straightness for Lines using FCF Dimensions - PC-DMIS now supports the Y14.5 standard for straightness. Legacy form dimensions still calculate the least squares form.
Support for Per Unit Straightness - FCF dimensions now support the ability to define and display straightness per a unit length.
Improved Planar Zone Support - Orientation FCF dimensions, Angularity, Parallelism, and Perpendicularity, now support planar zones.
Improved Editing of Tolerances and Nominal Values - The Location dimension's dialog box has been enhanced to display a grid for simplified editing of tolerances and nominal values.
Support for Profile of Line - Both FCF and legacy dimension now support Profile of Line (formonly) when the considered feature is a constructed curve based on a linear scan.
Half-Angle Support - You can now display the angle axis (A) for Location Dimensions at half its usual value.
Specify Projection Length - You can specify a projection length/width for the FCF parallelism of a plane.
Reporting
Save Report and Label Templates to Previous Versions - When you choose File | Save As for a label template or report template, PC-DMIS lets you save it back to a previous version.
Auto Features
Measurement Strategies - PC-DMIS now includes some optional strategies you can select that change how it executes some auto features.
Constructed Features
Easier Offset Constructed Plane - You can now construct an offset plane feature from a single plane feature as the input.
Fixtures
Easier Fixture Sharing - You can now save and load fixture files using the Quick Fixture dialog box.
Languages
More Language Support - The PC-DMIS user interface now supports these languages: Czech, Hungarian, and Turkish.
For a complete list of enhancements, view the readme.txt file for this version.
PC-DMIS 2009 MR1 contains these main enhancements:
Machine Limit Modification (MR1) - You now have the ability to modify the limits of animated machines that ship with PC-DMIS, not just custom-created machines. This provides you with greater flexibility when working with existing animated machines.
Scan Line Indicator (MR1) - When using a laser probe in PC-DMIS, a colored scan line indicator appears on the Graphics Display window to show the position and distance of the beam.
Visualization Tools (MR1) - When using a laser probe in PC-DMIS, colored graphical overlays appear in the Graphics Display window to provide you with a visual perspective for matching colored parameters or settings in the Probe Toolbox and in the Auto Feature dialog box.
Move Path Lines (MR1) - You can easily click a path line segment in the Graphics Display window and move its center point to a new location.
Dock or Float the Probe Readout Window (MR1) - You can switch between docking or floating the Probe Readout window.
Export as Datalog (MR1) - You can now export your measured data as a Datalog text file.
Export as XAML (MR1) - You can now export your model files as wireframe or solid XAML formats.
Probe-specific Slot Clearance Distance (MR1) - PC-DMIS supports the ability to define a slot clearance distance that is tied to a specific probe. This provides additional flexibility when using slot clearance distances.
Separate Deviations for Discrete and Scanned Measurements (MR1) - For machines with supported interfaces, you can now follow a procedure to create separate radial deviations for discrete and scanned measurements when using contact-based analog scanning probes. This addresses occasional size discrepancies during post-calibration measurement.
PowerLock for Leica Tracker (MR1) - When using supported Leica Tracker machines with PC-DMIS Portable, you can now quickly reestablish a broken beam by simply pointing a reflector at the Tracker. You do not need to catch the beam with the reflector.
CMS (MR1) - You can now use CMS laser probes with PC-DMIS.
Add Point Info Boxes inside Analysis Objects of a Custom Report(MR1) - Analysis objects in the Custom Report editor now have additional properties to support the display of Point Info boxes.
Visualize Duplicated Pages from Original (MR1) - A small red cross icon appears at the top left of a duplicated page in the Report window.
v2009 Help File Available in these Languages (MR1): Russian, Turkish, Spanish, French
The complete list of updates and fixes are listed here:
------------------- Minor Release 1 Updates (Nov 06, 2009) --------------
106497 - Need probe.dat content and related DRAW files for V4.0 and up for Tesastar-M7.5 wrists
106494 - Compile and Add latest help files for MR1 Release
106454 - Add Sheffield Apollo RS-30, RS-50 and RS-150 to Machine.dat
106449 - Making hit processing more general
106426 - Ensure needed automation interfaces are available for the universal jog box project
106424 - Add total station custom command
106419 - Make custom toolbars and layout for TPS
106414 - Create an interface for the Firmware Distributed Controller (FDC)
106413 - Add FDC interface dlls to PC-DMIS 2009 install set
106411 - Add Context Help links for new Dialog Boxes, Menus, Toolbars, etc.
106410 - Add Icons for new menu items
106390 - We need the ability to visualize laser overscan, ringband, etc.
106382 - Optimise CPoint3 operators not to unnecessarily call the default constructor
106361 - 4 CustProg options missing text
106355 - Supplemental CD needs to return
106342 - Add registry option to control the number of targets used during the vision ring calibration
106341 - Add support for PC-DMIS to get the number of sensor mount points from the HSI
106340 - ER 505915: Add Auto-focus, SensiLight, Laser buttons to LIV toolbar
106337 - WAI Jogbox IP_Button - make a new version part of installations, finalize details
106327 - Probing options enabled or disabled as necessary
106317 - Add a Training subdirectory to the install path to include unique files used by the Hexagon training staff.
106316 - Add Probe comp towards/away to quick start
106315 - Add point count per feature type to Quick Start
106313 - Implement Probe compensation for points based on workplane for totalstation interface
106311 - Add ability to display path lines for selected PP commands
106310 - Modify the summary mode editor to show commands without the expansion +
106308 - Add infrastructure for the new Vision Gauge window
106297 - Add Total Station status bar
106265 - Add totalstation command line switch and hasp capabilities
106261 - Update installed PDF driver to latest.
106257 - Create new menu structures for Total Station device
106251 - Use the Cad Cut Plane vector as the view vector when creating a new graphical analysis object on a custom report
106248 - When arrow heads are turned off, change drawing so arrow shaft extends the full distance
106243 - Switch LeaderMeasured proprty to LeaderTermination property on graphical analysis view
106241 - Create icons, menuitems and toolbars for new totalstation interface.
106206 - Create an icon for the PowerLOCK button
106191 - Extension for 4th axis (manual rotary table) for ENC7480
106181 - Need to add PowerLOCK On/Off button
106180 - Update for quad or 1990+ QVI controller
106156 - Automically use auto insert moves when adding new features
106120 - Add support for 10x fixed optics system
106089 - Raytheon: Allow prehit to be sent to server independantly of wether or not probing parameters are allowed
106044 - Allow PC-DMIS TopSpeed to be used synamically
106013 - Support of ST-andard probe for 8bt ZEISS controllers in NEW Zeiss Dll
106009 - Multiple tool changers for ZEISS machine interface
106609 - Need to upload new version of Perceptron Toolkit
104949 - Allow to display Operator Comments as large as the screen
103406 - Implement Perceptron V5 scanning probe
103098 - Add the option to allow the user to move path lines
264551 - Stdev outlier filter isn't applied when MultiCapture is active
264207 - We need to ignore scan points whose qual tag is 9
264206 - Returning MEAS BALLCENTER for MEAS CENTROID
264200 - Lathe is using XYZ axes but is checking for C axis
264189 - Gate size is zero when fallback to Open Loop scan
264071 - PCDMIS crashes when closing part-program or PCDMIS
264070 - There are some problems in creating wireframe xaml file
264069 - PCDMIS crashes during creation of Hyper report
264065 - NcFanuc interface does not stop monitor on exit of PCDMIS program
264063 - AFDlg "Test" execution is sometimes showing Portable Laser Execution prompts when it shouldn't.
264030 - Left and Right clipping parameters are swapped
264978 - Each vb-event gets activated 2 times, for example TheView.RunInitialize or TheView.RunTerminate
264976 - The property layer is missing for all objects ....
264970 - Change of tips / angles not always sent to server
264969 - When setting datum on the part, a point features moves away from where it is expected to be
264965 - OP 110 PRG loads/updates very slowly
264940 - The leader lines for all labels on a custom report ends in space far off from the part image
264939 - DAIMLER Mettingen - If drag a Location on CRO in Customreport, a label for every Axis will be insert.
264924 - New location of CNC data causes problems at least with probes
264900 - Angle & Angularity dimension not recognising sign change
264898 - Measuring large circles (>150mm) doesn't always measure inside the target
264882 - Change manager finds differences that don't exist
264874 - Label (that uses assignment / variable values from main prg) in a custom report terminates the prg and software
264861 - Leitz Warning Messages
264857 - Part programs created in 2009 cannot be saved back and opened in 4.3 MR1...
264851 - Machine volume on the wrong position
264841 - The radio buttons in the GD&T callouts group box in the Rotate Options dialog are disabled.
264840 - Helical scan start angle does not match pc-dmis programmed start angle + other misc problems
264814 - Unable to create auto features after import of pro-e dci part. Have to close and re-open.
264813 - Russian installation sequence is in English (but Russian PC-DMIS gets installed... whew!)
264812 - pRO-E dci wont allow transform after import of assembly
264807 - Installing in any language produces warning dialog about 'turkish.mva'.
264804 - Auto Trigger Plane only works on Z plane
264802 - Per unit line profile graphical analysis confusing display
264801 - Dimension graphic for polar radius location is excessively huge
264765 - Machines missing from Machine.dat
264718 - MODE/DCC - MANUAL buttons on toolbar are missing!
264713 - Construct Adjust filter not working correctly
264708 - Laser Autofeature Surfacepoint: COP extraction data extraction is using an infinte length cylinder
264707 - Laser Autofeature Edge Point: No way to enter "Back-off" distance
264705 - Laser Autofeature Edgepoint: Mysterious "Extrusion" value not described. Should be "Depth"
264678 - Cannot click on a point in the point cloud to define a laser auto feature.
264673 - Visualisation of clearance planes is based on the CAD coordinate system instead of the part coordinate system
264653 - MultiCapture is active in manual mode
264638 - When running programs offline, probe dialog and status bar do not update probe position.
264632 - 3D Circle comps. in WRONG direction for the projection plane
264562 - Portable Laser Memory Leak
264553 - The graphicalanalysis.rtp doesn't report all dimension types
264550 - Can not calibrate tables
264534 - When they import a big CAD file they got a big problem with the perfomance of PC-DMIS
264409 - Circles constructed from scans vary greatly in diameter from measured circles.
264384 - Program gives much different results under 3.7 then with 4.4
264338 - Inspection Plan Defaults - Some resource problems.
264320 - Slave arm manual measurment does not work for first point of Autocalibrate find sphere. Dual Arm
264237 - move point/relearn doesn't switch machine in manual
264221 - If number of parameter-settings is too large PC-DMIS crashes
264195 - Asserts
264105 - Perpendicularity dimensions giving zero deviation with legacy & FCF
262967 - Simultaneous Evaluation does not seem to be respecting the multiple tolerance zones from the input FCF's...
262793 - Optical mag value in UI and feature are always besed on a 1/2 inch CCD and not adaptirng to the actual CCD size
262704 - Angle greater than 180 displays as negative in the NON-Legacy TP dimension
262657 - PCD2Excel is ignoring National Settings in Windows, and produces .csv files that can not be directly loaded
262514 - Rotary scan can't create scanning data into plolar coordinate system
262428 - Element activate and deactivate in GD&T
262388 - New Wristspeed command is not working at all
262380 - Probe crash on stud when using read pos Auto Circle
262314 - After the optimize part program operation has finished it takes 2 min 44 sec before the user can continue to work
262176 - Probe graphic in Collision Detection dialog seems to randomly disappear or move around...
262105 - Encountered an improper argument - Simultaneously Evaluating FCF.
261977 - Polar and cartesian tp in legacy do correlate with FCF tp
261906 - Concentricity
261712 - Warmup not set when dropping the sensor, Arm2 only
261285 - When scanning for calibration (and possibly and predefined scan) when 0 points are taken, the controller and PC-DMIS hang and both have to be rebooted.
260981 - Pressing red button before opening a file crashes PC-DMIS
260802 - Need 2nd CMS portable probe file, and cleanup
260549 - Angle Vector(I,J,K) can't change to new values after I check "Specify Theos" in the Construct Ellipse window
260228 - Feature target not updating when "On error" has been activated
259973 - When F9 on a LOAD/MACHINE command the virtual machine in the graphics window disappear.
259067 - The F3 command marks some movements of the wrong arm.
258801 - Crash in the Tesastar-r rack picking the Contour with the rotated adapter loaded
258767 - Autodimensioning for location does not use previous tolerances
258766 - Don't generate legacy tp DF axis if Auto not selected, feature is at RFS, and registry setting says no DF
258067 - Probe orientation does not track rotary table position
254907 - Concentricity and coaxiality dimension's color bar in the dimension inform box is not fit to the color definition
254319 - Cross hair resizing when mag is changed by cross probe cal start
253422 - Circular Runout, use of two Datum
252655 - In Summary mode, in IF windows (example) if you entry a wrong expression, Impossible to edit, always error message
251327 - FS#14 Surfaces are missing and wrong displayed after import using CATIA V5 DCT
250017 - Memory leak
246501 - F1 on a FCF profile returns the DimensionCommandFormat Help page
245816 - In vision probe offset calibration, the crosshair target jumps to center of FOV after stage movement.
244758 - Changing the Graphical Multiplier of a profile dimension only works once.
240840 - For Cylindricity dimension, can only change Graphical Analysis multiplier once
240836 - The Tolerance of Profile produces strange value with two Datums.
238292 - Analysis arrows gets duplicated after changing the Arrow Multiplier.
235638 - 2D Distance has MAX and MIN that are larger than the MEAS value
233712 - SYSTEMS 4 UI : Operator Mode
221539 - Odd Min/Max data for location dimensions...
220561 - Creating an analysisview command by typing in edit window assigns multiplier to be 1
264525 - When execution is halted, -M does not give the current probe position
264225 - Analysis view shows a different view direction after the first execution in Version 2009
264677 - FacePoint: the segregation area is drawn half of what it is
256764 - Execution of alignment commands where the reference IDs are missing can cause fatal collisons
259491 - Daimler Mettingen - Customize labels in existing customreport is not saved
264581 - Rotary scan make pc-dmis crash in v43mr2 and 2009mr1
265024 - Rotary table coordinate system is not handled in the right way
262593 - Part temperature compensation also scales the probe diameter which is wrong
262514 - Rotary scan can't create scanning data into plolar coordinate system
265164 - DMIS Import: need workaround for CONST/EXTREM statement
106264 - Remove I-DEAS DCI in Planner from DCI menu
106255 - Enhance constructions so that some of the options are remembered from previous settings
106246 - When creating an analysis view on a custom report, automatically used the last used label on previous analysis view objects
106244 - Create new sample label that only has a deviation value
106233 - Make the DRO a dockable window
106230 - Add M&H Probe set to installation
106193 - Set Part Temperature Manually Without TEMPCOMP Dialog
106173 - Incorporate the new Faro API
106165 - Enable snap grid when grid is hidden
106155 - Add Visual Indicator of which page is the master page
106075 - Add the ability to import GD&T from the DataKit translator from the Catia V5 DCI
106074 - Add auto align to Planner Alignment dialog
106068 - ScanLineIndicator: Use existing live view code to validate the new scan line indicator
106041 - Develop API to display live readouts
106018 - Make sure probe diameters are required after a probe reorientation
106681 - ER 505310 - VISIO: Support for a ringlight with 4+8 sectors
106679 - ER 505311 - VISIO200: Support of the motorized zoom on the I++ VISIO systems
104950 - Allow to change ReadoutDisplay and content during runtime of partprogram
103841 - Add the possibility to measure an Hexagon feature with a laser Probe. EN #503739. Fouth step: add the ring band management.
264944 - Workplane change not kept if Quick Start is closed
264699 - Menu Option: File | Import | IGES(Alternate) is not shown in CAD++
264701 - Menu Option: Insert | Parameter Change | NC 100 Video Setting doen't show although Vision Option is checked.
264671 - Quick Start switching workplanes
264651 - The update of graphic analysis window will flash on the screen, when edit the tolerance value of FCF in edit window.
264640 - Application error closing part program
264604 - There also does not seem to be a way to set the bestfit algorithm and workplane from a basic script for an FCF profile.
264545 - Offline Move speed.
264425 - Animated toolchanger drawing issues CAT
264427 - Per unit profile dimension displaying same number for min and nmax deviation
264395 - Data is erratic if scanning while on one of the arm's stops
264361 - Can't scan: LinearOpen does not finish, Patch hangs after the first pass
264347 - F9 on alignment crashes PC-DMIS
264348 - F9 on Single Point circle changes hit number to 3
264357 - No way to restart a body axis scan if the beam is boken
264302 - T-Probe B button not working correctly to dismiss dialogs, or when using Quick Start
264303 - Dimension automated tests are reporting errors with the Circle and Cylinder DRFs for True Position
264236 - RTF and PDF can not display cad image correctly
264196 - Positive Reporting flips tolerance band when using variables for PTOL and MTOL
264141 - AUDI WZB - If Cad not equal Machine Axis, It's not possible to program features
264151 - Report will show the wrong BestFit methode if we change the methode in a FCF
264162 - VW EMDEN - When convert an 3.7 prb file or 4.2 prb file to 432 or 2009, uncalibrated probes are shown as calibrated
264166 - Lines do not project into correct workplanes
264116 - PC-DMIS does not import individual points of a FreeForm scan
262891 - Application Error when is open a program, and antecedently had been selected No Probe Attached.
262820 - "An Invailid Argument was Encountered" when start up Pcdmis for Leica
262599 - Laser AutoCone did not solve correctly on inside cone on demoblock.
262274 - COP Operators not executed after alignment
262102 - SYSTEMS 4 UI : Alignment dialog has some overlap issues in English...
261781 - Probe Readout window shrinks on each execution
261483 - Need to translate the "Point to %s" string in editortreeview.cpp
261442 - Program with 50 features is almost 70 MB and very difficult to work with, sluggish PC performance when loaded
260796 - FS#1521 ASM files of PRO'E can import correctly
260771 - SYSTEMS 5 INSTALL : We are not installing the .res files for the Wizards...
260473 - Problem about construct offset line
260416 - Problem about construct projection ellipse
260069 - SYSTEMS 4 UI : remove ID_REPORTING_CLEARALLTEMPLATEASSOCIATEDDATA
259858 - Modifying the file name doesn't work in the Dmis-Out Wizard window
259502 - Preview Window Does Not Update
258890 - Construct Pierce Point from Cone and Slot not working
258316 - AUDI WZB - Moving a Report Page by drag and drop in the Report Window is not saved
258193 - Result with bestfit alignement are much better in V3.7
257367 - Pcd2excel.res file not found
256731 - SYSTEMS 5 INSTALL : During installation, the EULA window appears behind the PC-DMIS window.
256419 - Using a CAD model, Theoreticals for the second feature measured (used for Rotation in the alignment) change during execution on a Faro Arm (Platinum) causing the cad to show incorrect in the graphics window for the remaining feature measurements.
255963 - FS#878 Pro/E Import fails
255916 - DMIS Export of COMMENT/OPER with Chinese characters not export/import correctly. Characters are not being imported.
255411 - FS#782 Problem with CATIA V4 model import
254887 - Round and Square slot icon is a circle icon in the Edit window in Summary Mode
254372 - Vision offset cal at max mag sizing targets based on start mag
253282 - MYCRONA: Camera rotation calibration fails on very high magnification systems
250570 - The move point dialogue seems very twitchy when using the offset from cad or feature
250203 - FS#10 ProE files are not importing correctly.
249710 - Wrong # of labels when report template has two CROs
249360 - Can't disable FCF's from recalled views
247728 - F9ing BF alignment turns on scaling
243330 - Copy / Paste in Custom Report Editor not working correctly
262710 - 6 Point best fit w 1.5" reflector not working
262685 - Four buttons in the EDGE scan dialog are absent. Italian Version.
262658 - QS Scan cannot be ended if beam was broken before pressing CTRL-I to stop the scan
262650 - SYSTEMS 4 UI : Colorwheel in Edit Dimension Color dialog overlaps groupbox border.
262633 - Meas(I, J, K) is wrong for constructed line (BFRE, 3D)
262569 - Calibration of a V4i if starting on a limit gives very poor results
264454 - Crash from using a deleted "global_my_first_dim1"
264450 - Label expressions can be erased
264249 - "Sensor Hardware Error" opening the LiveView
264198 - Saving back to V37.
264115 - customer can not use Shank Qual check box
262972 - Cannot accept hits with Button 2...
262734 - Distance to Target red lines are no longer functioning as in 4.2 MR2....
262659 - If scanning several 'scans' with T-Probe or reflector, the ID's of the scans count up only by odd numbers
262632 - After the alignment, the command PRINT on JogBox of Arm2, it produces a MOVE/POINT of Arm1.
262615 - Constructed Plane from COP never solves
262610 - 3D Line needs to be removed from the QS options
262582 - Best Fit 3D Repierce no longer works
262374 - SYSTEMS 4 UI : Date and TIme are swapped in the "Edit Tip" dialog
262207 - Start and End-Feature combo boxes in the optimize path dialog are not visible any longer in dual arm part programs
261813 - Pc-Dmis shows a scrambled layout initializing the sensors
261372 - AUDI WZB - by pathlines from cursor, we show also the pathlines of ARM 1 elements, while click on ARM 2 Element
260479 - problem about construct circle window
260466 - Able to select a 2d feature as a reference feature in the Edit measured feature window
257922 - Take hit option in Overview camera window not working
257726 - Bundle Alignment cannot be used for automation projects
255100 - Measured Cone, wrong points after edit
254139 - Bundle alignment, it should be NOT possible to edit the active station combobox manually since it can screw up the part program
253986 - Preview Window becomes taciturn after afdlg makes an appearance.
249128 - Generic parser and Point ID's
234348 - Zero measured results for line-profile dimension of AutoCircle
262968 - Measured Vector of Vector points which are using relative measurement is wrong
264223 - Executing multiple times this program, sometimes the actuals for the sphere's center are off by 1mm
264146 - The diameter of the calibration sphere reported in the .results file is wrong for Arm2 laser probes
262607 - Changing SensorMode results in losing COP ID, Measure option and AutoWrist settings in the Scan dialog
256560 - Offline Mode (Program Mode) won't give proper vector
264209 - Opening the Live View on Arm2 is too slow
264153 - The spinner control for lamp angle doesn't work
262450 - Move Point dialog: Offset to feature is not working
260872 - Some EdgePoints extracted from this cloud have wrong actuals for location and vectors
233275 - W Axis increment buttons not working offline
264301 - Programs migrated from V37 to PCDMIS 2009 perform profile formonly differently.
264012 - Changing the tolerance values in Feature Control Frame will not actualize the analyze view.
262694 - Everytime a Hyper Report command is inserted in the PP the HR editor window opens.
262858 - Iterate and repierce is not controllable from dimensions
262826 - Is there a way to tell if PC-DMIS is currently executing?
262787 - MYCRONA: Bestfit alignment with 2d profile doesn't work correctly
262690 - PCD2EXCEL wizard not working with Angularity and Proifile type dimensions
262452 - Incomplete command created when importing a Freeform Scan command from PC-DMIS Planner
259976 - Machine motors switching off if they insert a "MOVE/POINT,RELEARN" in their part programs
259874 - Dimension colours incorrect in dimension info boxes in legacy report
258785 - FCF true position displays only Current Alignment location values when Use Text Mode Dimension Reporting is selected for the TextOnly report format.
256538 - The German DMIS-Out Wizard dialog is not localized completly
249040 - Profiles are reporting in original alignment and not the alignment created from the results of the simultaneous evaluation
248371 - PCD2Excel take 100% CPU while dialogs are shown, but a reasonable number while the actual export is done.
264523 - Unable to select existing features from the CAD.
Sometimes user interface files (resource files) are updated outside of the normal release. Most of the time this will only happen for supported non-English language installs.
Links with instructions will appear here if this information is needed for this version.
![[Dividing Line Image]](../images/div.gif){kind=small}