  |
||
      |
||
 |
||
          |
||
|
 |
|
Supported CAD Systems
Wilcox Associates Inc. (WAI) has developed Direct CAD Interfaces and Direct CAD Translators to the following CAD systems for PC-DMIS Versions 3.2 and above.
- Important Capatibility Notes
- DCI & DCT Compatibility Table (v3.25 through v3.7 MR3)
- DCI & DCT Compatiblity Table (v4.0 through v4.2 MR2)
- DCI & DCT Compatiblity Table (v4.3 through v2011)
- PC-DMIS Planner - CAD System GD&T Support
Important Compatibility Notes
-
64-bit CAD system libraries are not supported.
-
Unigraphics DCT - Compressed files and assemblies are supported.
-
Pro/Engineer DCT Assemblies are supported.
-
Catia 5 DCT Assemblies are supported.
DCI & DCT Compatibility Table
|
|
PC-DMIS V3.25 including MR1-MR3 |
PC-DMIS V3.5 including MR1 |
PC-DMIS V3.5 MR2 |
PC-DMIS V3.6 |
PC-DMIS V3.7 including MR1 |
PC-DMIS V3.7 MR2 |
PC-DMIS V3.7 MR3 |
|
Acis DCI |
Up to v7.0 |
Up to v7.0 |
Up to v7.0 |
Up to v7.0 |
Up to v7.0 |
Up to v7.0 |
Up to v7.0 |
|
Catia 4 DCI |
4.2.* |
4.2.* |
4.2.* |
4.2.* |
4.2.* |
4.2.* |
4.2.* |
|
Catia 5 DCI |
N/A |
R8 - R13 |
R8 - R13 |
R8 - R13 |
R8 - R14 |
R8 - R14 |
R8 - R16 |
|
I-Deas DCI |
6a - 9 |
6a - 10 |
6a - 10 |
6a - 10 |
6a - 11 |
6a - 11 |
6a - 11 |
|
Pro/Engineer DCI |
2002i - Wildfire |
2002i - Wildfire |
2002i - Wildfire |
2002i - Wildfire |
2002i - Wildfire |
2002i - Wildfire |
2002i - Wildfire |
|
SolidWorks DCI |
N/A |
2003 - 2005 |
2003 - 2005 |
2003 - 2005 |
2003 - 2007 |
2003 - 2008 |
2003 - 2008 |
|
Unigraphics DCI |
Up to NX 1.0 |
Up to NX 1.0 |
Up to NX 3.0 |
Up to NX 3.0 |
Up to NX 4.0 |
Up to NX 4.0 |
Up to NX 4.0 |
|
Catia 4 DCT |
3.2 - 4.2.4 |
3.2 - 4.2.4 |
3.2 - 4.2.4 |
3.2 - 4.2.4 |
3.2 - 4.2.4 |
3.2 - 4.2.4 |
3.2 - 4.2.4 |
|
Catia 5 DCT |
N/A |
N/A |
N/A |
R6 - R12 |
R6 - R13 |
R6 - R14 |
R6 - R15 |
|
Parasolid DCT |
R11 - R14 |
R11 - R14 |
R11 - R14 |
R11 - R16 |
R11 - R16 |
R11 - R16 |
R11 - R16 |
|
Pro/Engineer DCT |
R18 - 2001 |
R18 - 2001 |
R18 - 2001 |
R18 - Wildfire 2.0 |
R18 - Wildfire 2.0 |
R18 - Wildfire 2.0 |
R18 - Wildfire 2.0 |
|
Unigraphics DCT |
V15 - V18 |
V15 - V18 |
V15 - V18 |
V15 - NX 2.0 |
V13 - NX 2.0 |
V13 - |
V13 - |
|
|
PC-DMIS V4.0 |
PC-DMIS V4.1 |
PC-DMIS V4.2 |
PC-DMIS V4.2 MR1 |
PC-DMIS V4.2 MR2 |
|
Acis DCI |
Up to v7.0 |
Up to v7.0 |
Up to v7.0 |
Up to v7.0 |
Up to v7.0 |
|
Catia 4 DCI |
4.2.* |
4.2.* |
4.2.* |
4.2.* |
4.2.* |
|
Catia 5 DCI |
R8 - R16 |
R8 - R16 |
R8 - R17 |
R8 - R17 |
R8 - R19† |
|
I-Deas DCI |
8 - 11 |
8 - 11 |
8 - 11 |
8 - 11 |
8 - 11 |
|
Pro/Engineer DCI |
2002i - Wildfire |
2002i - Wildfire 2.0 |
2002i - Wildfire 2.0 |
2002i - Wildfire 2.0 |
2002i - Wildfire 2.0 |
|
SolidWorks DCI |
2003 - 2008 |
2003 - 2008 |
2003 - 2008 |
2003 - 2009 |
2003 - 2009 |
|
Unigraphics DCI |
Up to NX 4.0 |
Up to NX 4.0 |
Up to NX 4.0 |
Up to NX 4.0 |
Up to NX 4.0 |
|
AIMS DCI |
|
|
|
|
|
|
Catia 4 DCT |
3.2 - 4.2.4 |
3.2 - 4.2.4 |
3.2 - 4.2.4 |
3.2 - 4.2.4 |
3.2 - 4.2.4 |
|
Catia 5 DCT |
R6 - R16 |
R6 - R16 |
R6 - R17 |
R6 - R17 |
R6 - R17 |
|
Parasolid DCT |
R11 - R16 |
R11 - R16 |
R11 - R17 |
R11 - R17 |
R11 - R17 |
|
Pro/Engineer DCT |
R18 - Wildfire 2.0 |
R18 - Wildfire 3.0 |
R18 - Wildfire 3.0 |
R18 - Wildfire 3.0 |
R18 - Wildfire 3.0 |
|
Unigraphics DCT |
V13 - |
V13 - |
V13 - |
V13 - |
V13 - |
|
|
PC-DMIS V4.3 |
PC-DMIS V4.3 MR1 |
PC-DMIS V4.3 MR2 |
PC-DMIS V4.3 Beta |
PC-DMIS 2009 |
PC-DMIS 2010 |
PC-DMIS 2010 MR1 |
PC-DMIS 2010 MR2 |
PC-DMIS 2010 MR3 |
PC-DMIS 2011 |
|
Acis DCI |
Up to v7.0 |
Up to v7.0 |
Up to v7.0 |
Up to v7.0 |
Up to v7.0 |
Up to v7.0 |
Up to v7.0 |
Up to v7.0 |
Up to v7.0 |
Up to v7.0 |
|
Catia 4 DCI |
4.2.* |
4.2.* |
4.2.* |
4.2.* |
|
|
|
|
|
|
|
Catia 5 DCI |
R8 - R17† |
R8 - R19 |
R8 - R19 |
R8 - R19 |
R8 - R19 |
R8 - R19 |
R8 - R20 |
R8 - R20 |
R8 - R20 |
R8 - R20 |
|
I-Deas DCI |
8 - 11 |
8 - 11 |
8 - 11 |
8 - 11 |
8 - 11 |
8 - 11 |
8 - 11 |
8 - 11 |
8 - 11 |
8 - 11 |
|
Pro/Engineer DCI |
2002i - Wildfire 3.0 |
2002i - Wildfire 3.0 |
2002i - Wildfire 4.0 |
2002i - Wildfire 4.0 |
2002i - Wildfire 4.0 |
2002i - Wildfire 4.0 |
2002i - Wildfire 4.0 |
2002i - Wildfire 5.0 |
2002i - Wildfire 5.0 |
2002i - Wildfire 5.0 |
|
SolidWorks DCI |
2003 - 2009** |
2003 - 2009** |
2003 - 2009** |
2003 - 2009** |
2003 - 2010** |
2003 - 2011** |
2003 - 2011** |
2003 - 2011** |
2003 - 2011** |
2003 - 2011** |
|
Unigraphics DCI |
Up to NX 5.0 |
Up to NX 6.0 |
Up to NX 6.0 |
Up to NX 6.0 |
Up to NX 7.5 |
Up to NX 7.5 |
Up to NX 7.5 |
Up to NX 7.5 |
Up to NX 7.5 |
Up to NX 7.5 |
|
AIMS DCI |
|
|
|
|
|
|
|
|
|
|
|
Catia 4 DCT |
V4.1.5 - V4.2.4 |
V4.1.5 - V4.2.4 |
V4.1.5 - V4.2.4 |
V4.1.5 - V4.2.4 |
V4.1.5 - V4.2.4 |
V4.1.5 - V4.2.4 |
V4.1.5 - V4.2.4 |
V4.1.5 - V4.2.4 |
V4.1.5 - V4.2.4 |
V4.1.5 - V4.2.4 |
|
Catia 5 DCT |
R8 - R18 |
R8 - R18 |
R8 - R19 |
R8 - R19 |
R8 - R19 |
R8 - R19 |
R8 - R19 |
R8 - R19 |
R8 - R19 |
R7 - R20 |
|
Parasolid DCT |
V7 - V18.1 |
V7 - V18.1 |
V7 - V18.1 |
V7 - V18.1 |
V7 - V18.1 |
V7 - V18.1 |
V7 - V18.1 |
V7 - V18.1 |
V7 - V18.1 |
V7 - V19 |
|
Pro/Engineer DCT |
2000 - Wildfire 3.0 |
2000 - Wildfire 3.0 |
2000 - Wildfire 3.0 |
2000 - Wildfire 3.0 |
2000 - Wildfire 4.0 |
2000 - Wildfire 4.0 |
2000 - Wildfire 4.0 |
2000 - Wildfire 5.0 |
2000 - Wildfire 5.0 |
2000 - Wildfire 5.0 |
|
Unigraphics DCT |
V15 - |
V15 - |
V15 - |
V15 - |
V15 - |
V15 - |
V15 - |
V15 - |
V15 - |
V10 - |
* The minimum CATIA 4.0 licenses required in order for the PC-DMIS CATIA 4.0 DCI to function properly with a model are the same that would allow the model to be opened, modified and saved in CATIA. Any lesser licenses will not be sufficient.
** SolidWorks 2007 does not support Windows Vista; however, PC-DMIS 4.3 and later does support Windows Vista. Therefore, PC-DMIS 4.3 installed on Window Vista does not support the SolidWorks DCI with SolidWorks 2007 or older. Solidworks DCI is supported with PC-DMIS 4.3 and later on Windows Vista with SolidWorks 2008 only.
The minimum licenses cannot be specifically defined because the ability to open, modify, and save a CATIA model will be somewhat dependent on the content of the model itself.
† R19 support in Catia 5 DCI was added to PC-DMIS 4.2 MR2 but not PC-DMIS 4.3 Release because 4.2 MR2 was released after the 4.3 Release.
Back to TopPC-DMIS Planner - CAD System GD&T Support
| CAD System Translators | Planner Versions Supporting Feature Creation | Planner Versions Supporting GD&T Selection | Planner Versions Supporting GD&T Creation |
| Catia V5 DCT | 2010 | 2010 | 2010 |
| Unigraphics NX DCT | 2010 | 2010 | 2010 |
| IGES | 2010 | Not available | 2010 |
| Pro/E DCT | 2010 | TBD | 2010 |
| SolidWorks DCT | 2010 | TBD | 2010 |
| Direct CAD Interfaces | Planner Versions Supporting Feature Creation | Planner Versions Supporting GD&T Selection | Planner Versions Supporting GD&T Creation |
| Catia V5 DCI | 2010 | 2010 | 2010 |
| Unigraphics NX DCI | 2010 | 2010 | 2010 |
| Pro/E DCI | 2010 | TBD | 2010 |
| SolidWorks DCI | 2010 | 2010 | 2010 |
sales@wilcoxassoc.com
| webmaster@wilcoxassoc.com
Copyright © 2002-2012, Wilcox Associates,
Inc.
Part of Hexagon Group